1 recenzija u jeziku: hrvatski za Extrudr PLA NX-2 smaragdno zelena
10 recenzije kupaca u drugim jezicima
4,3 od 5 zvjezdica
| 5 zvjezdice | | 14 | (58%) |
|---|---|---|---|
| 4 zvjezdice | | 7 | (29%) |
| 3 zvjezdice | | 1 | (4%) |
| 2 zvjezdice | | 1 | (4%) |
| 1 zvjezdica | | 1 | (4%) |
Filtriraj ocjene:
-
Tihomir
14. veljače 2024
"Provjerena kupnja" znači da su ocjenu dali kupci koji su stvarno kupili ovaj proizvod od nas. Međutim, svatko tko ima korisnički račun kod nas može dati ocjenu. Je li Vam ova ocjena bila korisna? (0) (0)
Ocijenjeno sa 5 od 5 zvijezdica.
Excellent results, with two caveats
- average bridging/overhangs. Consider using more strict support.
- not for layer heights above 0.25mm (@0.4mm nozzle) - from 0.28mm on, layers tend to misalign starting from sharp corners, and adhesion becomes poor.
Actually, datasheet says "Max. 50% layerheight"...
According to temp tower test, results are consistent between 200 and 225C. Almost no stringing. 215/60 is probably the best spot.
Bed adhesion becomes strong after 55C. Very strong. Wanna remove the printed object, let it cool down to at least 45.
IMO NX-2 series has nice colors, while technical info is top notch - from methods used to RAL codes and stuff.